Welcome! Let’s grow the hydrogen economy together. › Let’s grow the hydrogen community! › Questions & Answers › What are the key material requirements for silicone hoses used in hydrogen fuel

  • Roger Penn

    Member
    March 25, 2026 at 18:07

    One key requirement for silicone hoses is what they leach. If warm (60-80 °C) and humid (50-100% RH) gases (H2, Air, N2,…) pass through the silicone hose, it can leach hose material into the fuel cell stack (where it will cause degradation). In particular, silicone itself (siloxanes) can leach out and cause SITM (silicon in the membrane) in the fuel cells. The SITM causes the PFSA (perflourosulfonic acid ionomer) to swell, crack, and result in leaks (transfer leaks from anode to cathode). So in most test stations and fuel cell systems, the piping is 316L stainless steel, or Teflon (PTFE – polytetrafluorethylene) hoses to avoid contamination. If a silicone-based hoses is required, some leaching tests should be performed to see what comes out and if it is compatible with fuel cell operation.

Log in to reply.